| Suzhou Fuji Sakura Elevator Co., Ltd. will introduce to you that the elevator installation and maintenance site must be kept clean and unobstructed. The materials and parts used for installation and maintenance should be installed and repaired as accessories. They should be neatly stacked, large and small, heavy and light, and the equipment that is easy to roll, slide and deform should be filled and fixed to ensure safety. |
| 1. The elevator counterweight equipment and components should be scattered around the installation location. When stacking, wooden mats should be padded so that the load is evenly distributed on the floor and girder, and the unsafe factors caused by overloading the buildings and the use of buildings should not be concentrated on the floor and roof. |
| 2. For long and thin components or materials: various steel parts such as door heads, hall door columns, door frames, door leaves, etc. are not allowed to be placed upright to avoid accidents of dumping and hurting people. The method of horizontal placement should be adopted, and the cushion should be leveled and stabilized to ensure safety and prevent bending and deformation of the material to ensure good condition. |
| 3. For important equipment and components, such as measuring instruments, wires, electronic components, and small and easy-to-lost special parts, use special wooden boxes to lock and special personnel for safekeeping, and check accounts for use and verification. |
